Characteristics of GK120 series wall formwrok
1、 The framed formwork is a hollow steel structure covered with
plywood. The plywood is 18 mm thick and in good quality.
2、As a highly standardized system, it is flexible to assemble, and wood
batten can be filled in to satisfy the need for nonstandard size.
3、The formwork is also highly strengthened, and the wall formwork can
bear lateral pressure of 60 KN /m2 while the column
formwork can support 80 KN /m2.
4、The adjustable clamps are convenient to use and hold firmly.
5、There is a prizing part designed in the corner, which can help to
position and remove formwork easily.
6、The formwork is screwed on from the back when connecting frame and
plywood, and the surface of the finished concrete is perfect.
7、The formwork series are a complete system with a full set of
accessories, and can be installed flexibly according to project
demand.
1050 series /750 series adjustable column formwork
1050 series /750 series adjustable column formwork are used in the concrete
pouring of square or rectangle column. The largest column dimension is 1050x1050mm
and 750x750mm. Combined the two together, the rectangle column can be done，the largest dimension is 1050x750mm. Additionally，wood batten（width≤50mm） can be filled in the
corner to satisfy the middle dimension. The sketches are shown below:
C series vertical formwork is the column formwork series. They are matched with column waler. The cross section sketches are shown below:
Work with other formwork systems
Framed formwork is often used combining with the climbing formwork system or wall formwork system to substitute the timber beam formwork. Both combinations are acceptable on construction site.
| FOB Price: | negotiate |
| Minimum Order: | One 20ft container |
| Port: | Tianjin port |
| Payment Terms: | T/T L/C （bank transfer） |
